About this product

What is DTF Print?

Designs are printed onto a film using a specialist printer. Then the prints are directly transferred onto the garment via a heat press.

- DTF transfer is suitable for cotton fabrics used in clothing and home textiles.

You can use Flat Iron in Applying DTF Transfer Print.
Once Payment done
(Send your Koromi Design via Email - Maewonder.digital@gmail.com)
or Message here if you want us to send you a sample design.

How to apply using Flat Iron?
1. Position Your Design
Take your time and line up your artwork in the desired print area.
2. Press
Before pressing, place the parchment paper or a Protective Guard Sheet over the transfer for 20 seconds, pressing down with hard pressure.
3. Let it Cool. Then Peel.
After pressing, let your transfer rest until it is cool to the touch (minimum of 15-30 seconds). Once cool, lift the transfer from one corner and gently peel back.
4. Final Press
Place the parchment paper included or a single layer of t-shirt material over the design and press again for 15 seconds to soften the design, increase durability, and remove shine.
5. How to Wash
It is optimal to wash inside out with cold water. Being that you are using an iron instead of a heatpress (which applies heat with more pressure, more evenly), we would recommend hang drying instead of in the dryer. If you decide to use a dryer, we'd recommend on low heat, inside out.

Everyone's irons, heat, pressure is different when using an iron, so test to find out what works best for you. Remember that you cannot overpress your transfers. The better they are pressed, the more durability they have through washing and drying.

FREE NAME (3 letters only)
Size (A5)
5.83 x 8.27 inches

Picture is only reference but you can avail bigger size up to A4.
Thank you! -Maewonder!